57N-DHT 0.4kW AC Servo Motor
Description
0.40kW NEMA23 motor. Standard NEMA23 mount with 1/4" shaft. Shaft with two flat seats.
Note: This motor is only available as a 60V voltage class for use with DYN2 servo drive. Use with DYN4 servo drive is possible with 110/120VAC input.
Documentation
DHT/DST Series AC Servomotor |
Motor Specification
Servo Motor Model | 57N-DHT-A6TD1 |
---|---|
Rated Output | 0.4kW |
Rated Voltage | 60V |
Applicable Servo Drive | DYN2 / DYN4 |
Rated Torque | 1.27Nm |
Instantaneous Max. Torque | 3.82Nm |
Rated Current | 8.4A |
Max. Current | 21.0A |
Rated Speed | 3000rpm |
Max. Speed | 5000rpm |
Rotor Inertia | 0.426kg-cm^2 |
Torque Coefficient | 0.181N∙m/A |
Encoder | 16-bit Absolute [ ABS-16-01 ] |
Mass | 1.65kg |
Ratings | Time Rating: Continuous Thermal Class: F Excitation Method: Permanent Magnet Insulation Resistance: DC500V, >20MΩ Noise: ≤60dB; No Special Noise |
Environment | Ambient Temperature: 0~40 °C Storage: -20~50°C Ambient Humidity: 20~80% No Condensation |
Enclosure | IP65 |
Shock | 98m/s2 Max. (10G) |